AdvantEdge Metal Edge Systems

Replacing wood nailers at the building perimeter with Elevate AnchorGard® Nailer-T increases the structural integrity of the roof perimeter, significantly reduces risk of failure, and helps protect the entire roof system from costly damages and blow off. Elevate AnchorGard® Nailer-T comes in varying sizes for low slope applications, non-tapered, and pitched metal roof retrofits. Using Elevate AnchorGard® Nailer-T, insulation can be continuous directly to the roof's edge, improving thermal performance. Elevate AnchorGard® Nailer-T is fast and easy to install and comes with pre-punched fastening holes to ensure proper installation, every time. Elevate AnchorGard® SP HG Fascia, Elevate AnchorGard® Canted Fascia, Elevate AnchorGard® Drip Edge, and Elevate Industrial Gutters are ideal roof edge partner products to complete the edge assembly.

Elevate AnchorGard® Nailer-T is fast and simple to install on metal retrofits and eliminates the need for individual wood blocking assemblies. No more time-consuming wood cutting, instead use Elevate AnchorGard® Nailer-T. Get a secure, straight, and even edge that will provide lasting performance. Elevate AnchorGard® Nailer-T comes with a flat or pitched flange up to a 4/12 for a variety of metal roof installations.

Elevate EdgeBox RI is an innovative product that is an engineered metal replacement system for roof nailers. Replaces traditional wood blocking or nailers at the perimeter of a low-slope roof. Eliminates concerns about fastener corrosion in ACQ treated wood. No rotting, insect damage or mold.

Elevate EdgeBox RI is an innovative product that is an engineered metal replacement system for roof nailers. Replaces traditional wood blocking or nailers at the perimeter of a low-slope roof. Eliminates concerns about fastener corrosion in ACQ treated wood. No rotting, insect damage or mold.

Elevate's 1-piece Reglet Counterflashing provides a watertight termination at the leading edge of the roofing material. This 1-piece design is a great option when a receiver and a joint reglet are not required.

Elevate's Surface Mounted Counterflashing provides a watertight termination at the leading edge of the roofing material. This 1-piece design is a great option when a receiver and a joint reglet are not required.

Elevate's 2-piece Reglet Counterflashing is easily installed by hooking and rotating the flashing to snap into the receiver. It provides a watertight termination at the leading edge of the roofing material. This reglet can be taken apart for easy roof repairs.

Elevate's 2-piece Surface Mounted Counterflshing is easily installed by hooking and rotating the flashing to snap into the receiver. It provides a watertight termination at the leading edge of the roofing material. This reglet can be taken apart for easy roof repairs.

Elevate's 2-piece Thru Wall Counterflashing provides a watertight termination at the leading edge and inside of the wall. This reglet is used for new construction applications and can be taken apart for easy roof repairs.

Elevate's Brick-Wall Cap is available in a range of face heights and depths specifically designed to meet the buildings coverage requirements. This accessory is also offered in a variety of gauges and finishes to match the roof edge system.

Flow-Thru Drain Bars are engineered to work with industrial gutter systems to hold back ballast on the roof and allow water to flow through.The 12' lengths mean less material handling and quicker installation times. Standard and custom colors are available to match your specific job requirements.

Elevate's Soffit Cleat is designed to offer maximum flexibility with sizes matching individual job requirements. The 3½ " concealed splice plates prevent plate migration and provide an attractive appearance.

Elevate Extender is easy to install, and consist of a 24 Ga. galvanized continuous cleat and a formed fascia extender. Our Extenders are available in 12-ft. lengths and with a variety of face heights to accommodate most requirements.

Elevate Expansion Joints are ideal for allowing thermal movement and condensation control between two roof systems. The Expansion Joint prevents condensation by insulating against internal building temperatures. Also, the continuous cleat protects the Elevate Expansion Joint from wind-driven rain. This carefully engineered product ensures long-lasting quality and high performance.

Elevate Expansion Joints are ideal for allowing thermal movement between a roof system and a terminating wall. The Expansion Joint prevents condensation by insulating against internal building temperatures. Also, the continuous cleat protects the Elevate Expansion Joint from wind-driven rain. This carefully engineered product ensures long-lasting quality and high performance.

Flow-Thru Drain Bars are engineered to work with industrial gutter systems to hold back ballast on the roof and allow water to flow through.The 12' lengths mean less material handling and quicker installation times. Standard and custom colors are available to match your specific job requirements.

Paver edges are designed for roof systems using Elevate Ballast Pavers Systems. Fascia systems for ballast pavers provides your roof system with the maximum protection available against wind up-lift damage in today's roofing market.