Cover Boards

ISOGARD HD Cover Board contains a closed-cell polyiso core that utilizes ISOGARD foam technology, and can provide greater UL fire ratings. ISOGARD HD cover board provides the highest thermal performance of any 1/2″ insulation cover board product on the market, and it is resistant to extreme weather conditions.  Lightweight and easy to cut and install, this high density cover board offers savings from reduced transportation costs, labor and material during application.

BENEFITS

• Lightweight.
• 12 fasteners per 4’x8’ sheet. 
• 2.5 R-Value per ½” of thickness. 
• At only 12 lbs. per 4’x8’ sheet, this product can offer savings from reduced transportation costs, labor and material during application.

STRUCTODEK HD with Primed Red Coating is a high-density wood fiber roof cover board with a proprietary red primer on two sides that provides an optimal bonding surface for single-ply adhesives, hot asphalt and, unlike other wood fiber boards, Elevate MB Cold Adhesive. It can be used with single-ply roof systems, as well as BUR and Mod Bit.

BENEFITS

• UL and FM approved in many assemblies, STUCKTODEK can be used on any low-slope roofing application whether new, recover or tear-off.
• STRUCKTODEK is lightweight compared to many other roofing cover boards, and it is fiberglass-free and cuts with a standard utility knife.
• Stocked in 12 locations around the country to facilitate job start-ups and completions, STRUCKTODEK is available in 4’x4’ and 4’x8’ boards (W56-358-8531 for a 4’x4’x ½” board and W56-358-8532 for a 4’x8’ x ½” board).
• It is compatible with adhesives used on all single-ply membranes including low VOC, water-based and foam adhesives. It is also compatible with Elevate approved hot asphalt and Elevate’s All-Purpose MB Cold Adhesive.
• With an R-Value of 1.3 for the ½” thickness, STUCKTODEK can help contribute to LEED® credits.
•  STRUCKTODEK can be included in the Red Shield™ Warranty.

Securock® Brand Gypsum-Fiber Roof Boards are a fiber-reinforced, homogenous panel that provides strength and water resistance through to the core. It provides exceptional bond and low absorption in adhered systems, and offers sustainable design for all types of roofing systems including single-ply, fluid-applied, built-up, spray foam, metal and modified bitumen roofing.  Securock® products are available in thicknesses of ¼”, 3/8”, ½”, and 5/8”.